Back

Programme Committee

Assoc. Prof. Dr. Weerapun Duangthongsuk

Email : weerapund@sau.ac.th

Qualifications

Bachelor's Degree

  • B.Eng. Mechanical Engineering Sripatum University

Master's Degree

  • M.Eng. Mechanical Engineering King Mongkut’s University of Technology Thonburi

Doctoral Degree

  • D.Eng. Mechanical Engineering King Mongkut’s University of Technology Thonburi  

World’s Top 2% Scientists from Standford University (2019-2026)

top 2
  • Wongwises, S., Duangthongsuk, W. and Naphon, P., 2002, “Tube-Side Two-Phase Heat Transfer Coefficients of Refrigerant HFC-134a Flowing through a Fin-and-Tube Evaporator” International Communications in Heat and Mass Transfer, Vol. 29, pp. 387- 400. https://www.sciencedirect.com/science/article/abs/pii/S0735193302003287
  • Duangthongsuk, W and Wongwises, S., 2007, “A Critical Review of Convective Heat Transfer of Nanofluids” Renewable and Sustainable Energy Reviews, Vol. 11, pp. 797 – 817.  https://www.sciencedirect.com/science/article/abs/pii/S0894177709002039
  • Duangthongsuk, W and Wongwises, S., 2008, “Effect of Thermophysical Properties Models on the Prediction of the Convective Heat Transfer Coefficient for Low Concentration Nanofluid” International Communications in Heat and Mass Transfer, Vol. 35, pp. 1320 – 1326. https://www.sciencedirect.com/science/article/abs/pii/S0735193308001516
  • Duangthongsuk, W and Wongwises, S., 2009, “Heat Transfer Enhancement and Pressure Drop Characteristics of TiO2-Water Nanofluid in a Double-Tube Counter Flow Heat Exchanger” International Journal of Heat and Mass Transfer, Vol. 22, pp. 2059 – 2067. https://www.sciencedirect.com/science/article/abs/pii/S0017931008006248
  • Duangthongsuk, W and Wongwises, S., 2009, “Measurement of Temperature-Dependent Thermal Conductivity and Viscosity of TiO2-Water Nanofluids” Experimental Thermal and Fluid Sciences, Vol. 33, pp. 706 – 714. https://www.sciencedirect.com/science/article/abs/pii/S0894177709000156
  • Duangthongsuk, W and Wongwises, S., 2009, “An Experimental Study on the Heat Transfer Performance and Pressure Drop of TiO2-Water Nanofluids Flowing under a Turbulent Flow Regime” International Journal of Heat and Mass Transfer, Vol. 52, pp. 2059 – 2067. https://www.sciencedirect.com/science/article/abs/pii/S0017931008006248
  • Duangthongsuk, W and Wongwises, S., 2010, “Comparison of the Effects of Measured and Computed Thermophysical Properties of Nanofluids on Heat Transfer Performance” Experimental Thermal and Fluid Sciences, Vol. 44, pp. 616 – 624. https://www.sciencedirect.com/science/article/abs/pii/S0894177709002039
  • Wongwises, S., Laohalertdecha, S., Kaew-on, J., Duangthongsuk, W., Aroonrat, K. and Sakamatapan, K., 2011, “Evaporation Heat Transfer and Flow Characteristics of R-134a Flowing Through Internally Grooved Tubes” Heat and Mass Transfer, Vol. 47 (6), pp. 629-640. https://link.springer.com/article/10.1007/s00231-010-0748-6   
  • Demir, H., Dalkilic, A.S., Kurekci. N.A., Duangthongsuk, W and Wongwises, S., 2011, “Numerical Investigation on the Single Phase Forced Convection Heat Transfer Characteristics of TiO2 Nanofluids in a Double-Tube Counter Flow Heat Exchanger” International Communications in Heat and Mass Transfer, Vol. 38, pp. 218-228. https://www.sciencedirect.com/science/article/abs/pii/S0735193310002939
  • Chaiwongsa, P and Duangthongsuk, W, 2011, “Hot Water Making Potential Using of a Conventional Air-Conditioner as an Air-Water Heat Pump” Physics Procedia, Vol. 8, pp. 165-170. https://www.sciencedirect.com/science/article/pii/S1877705811000440
  • Bajestan, E.E., Niazmand, H., Duangthongsuk, W, Wongwises, S. and Renksizbulut, M.,2012, “Numerical Investigation of Effective Parameters in Convective Heat Transfer of Nanofluids Flowing under Laminar Flow Regime” International Journal of Heat and Mass Transfer, Vol. 54 (19-20), pp. 4376-4388. https://www.sciencedirect.com/science/article/abs/pii/S0017931011002754
  • Duangthongsuk, W and Wongwises, S., 2012,” A Dispersion Model for Predicting the Heat Transfer Performance of TiO2–Water Nanofluids under a Laminar Flow Regime” International Journal of Heat and Mass Transfer, Vol. 55, pp. 3138-3146. https://www.sciencedirect.com/science/article/pii/S0017931022005579
  • Duangthongsuk, W, Dalkilic, A.S. and Wongwises, S., 2012, “Convective heat transfer of AlO3-water nanofluids in a microchannel heat sink, Current Nanoscience, Vol. 8 (3), pp. 317-322. https://www.benthamdirect.com/content/journals/cnano/10.2174/157341312800620368    
  • Dalkilic, A.S., Kayaci, N, Celen, A., Tabatabaei, M., Yildiz, O., Duangthongsuk, W and Wongwises, S., 2012, “Forced Convective Heat Transfer of Nanofluids – A Review of the Recent Literature”, Current Nanoscience, Vol. 8, pp. 949-969. https://www.ingentaconnect.com/contentone/ben/cnano/2012/00000008/00000006/art00024
  • Duangthongsuk, W and Wongwises, S., 2013, “An Experimental Investigation into the Heat Transfer and Pressure Drop Characteristics of a Circular Tube Fitted with Rotating Turbine-Type Swirl Generators”, Experimental Thermal and Fluid Sciences, Vol. 45, pp. 8-15. https://www.sciencedirect.com/science/article/abs/pii/S0894177713000964
  • Duangthongsuk, W., Yiamsawasd, T., Dalkilic, A.S. and Wongwises., S., 2013, “Pool-Boiling Heat Transfer   Characteristics of Al2O3–Water Nanofluids on a Horizontal Cylindrical Heating Surface”, Current Nanoscience, Vol. 9, pp. 56-60. https://www.eurekaselect.com/article/48767
  • Duangthongsuk, W and Wongwises, S., 2013, “Comparison of the Heat Transfer Performance and Friction Characteristics between Fixed (FTSG) and Free Rotation (RTSG) Turbine-Type Swirl Generators Fitted in a Small Circular Tube, Experimental Thermal and Fluid Sciences, Vol. 50, pp. 222-228. https://www.sciencedirect.com/science/article/abs/pii/S0894177713000964
  • Duangthongsuk, W and Wongwises, S., 2015, “An Experimental Study on the Thermal and Hydraulic Performances of Nanofluids Flow in a Miniature Circular Pin Fin Heat Sink”, Experimental Thermal and Fluid Sciences, Vol. 66, pp. 28-35. https://www.sciencedirect.com/science/article/abs/pii/S0894177715000345
  • Duangthongsuk, W and Wongwises, S., 2015, “Heat Transfer and Pressure Drop in a Pin Fin Heat Sink Using Nanofluids as Coolant”, Advanced Materials Research, Vol. 1105, pp. 253-258. https://www.scientific.net/AMR.1105.253
  • Duangthongsuk, W and Wongwises, S., 2015, “A Comparison of the Heat Transfer Performance and Pressure Drop of Nanofluid-Cooled Heat Sinks with Different Miniature Pin Fin Configurations”, Experimental Thermal and Fluid Sciences, Vol. 68, pp. 111-118. https://www.sciencedirect.com/science/article/abs/pii/S089417771500196X
  • Bajestan, E.E., Niazmand, H., Moghadam, M.C., Duangthongsuk, W, and Wongwises, S., 2016, “Experimental and numerical investigation of nanofluids heat transfer characteristics for application in solar heat exchangers”, International Journal of Heat and Mass Transfer, Vol. 92, pp. 1041-1052. https://www.sciencedirect.com/science/article/abs/pii/S0017931015303975
  • Duangthongsuk, W and Wongwises, S., 2017, “An experimental investigation on the heat transfer and pressure drop characteristics of nanofluid flowing in microchannel heat sink with multiple zigzag flow channels”, Experimental Thermal and Fluid Sciences, Vol. 87, pp. 30-39. https://www.sciencedirect.com/science/article/abs/pii/S0894177717301176
  • Duangthongsuk, W and Wongwises, S., 2018, “A comparison of the thermal and hydraulic performances between miniature pin fin heat sink and microchannel heat sink with zigzag flow channel together with using nanofluids”, Heat and Mass Transfer, Vol. 54(5), pp. 3265–3274. https://link.springer.com/article/10.1007/s10973-026-15388-5
  • Duangthongsuk, W, Laohalertdecha, S. and Wongwises, S., 2024, “Experimental Study on the Hydrothermal Performance of Nanofluids-Cooled Heat Sinks with Diamond Shape Micro Pin Fin Structures”, International Journal of Thermofluids, Vol. 22, pp.100691. https://www.sciencedirect.com/science/article/pii/S2666202724001332
  • Duangthongsuk, W and Wongwises, S., “Experimental Study on the Thermo-Hydraulic Performance of Nanofluids Flowing Through Microchannel Heat Exchangers with Various Flow Configurations, Simago Q1, in preparation
  • Duangthongsuk, W Laohalertdecha, S.  and Wongwises, S., “Heat Transfer and Pressure Drop in a Novel Microchannel Heat Exchangers Using Nanofluids as Coolant”, International Journal of Thermofluids, Simago Q1, in preparation
  • Weerapun Duangthongsuk and Prathun Chaiwongsa, 2552,” A Comparison of the Performance of Split-Type Air Conditioners Using a Conventional Condenser versus a Condenser Combined with Water Vapor Evaporation for Heat Dissipation” Southeast Asia University Engineering Journal Vol. 5 No. 1, June 2552 –November 2552
  • Weerapun Duangthongsuk and Prathun Chaiwongsa,” Heat Exchangers and Techniques Used to Enhance Heat Transfer” Southeast Asia University Engineering Journal Vol. 5 No. 2, December 2552 – May 2553.
  • Weerapun Duangthongsuk” Heat Transfer and Flow Characteristics in Microchannels” Southeast Asia University Engineering Journal Vol. 5 No. 2, December 2552 – May 2553
  • Weerapun Duangthongsuk and Prathun Chaiwongsa, 2555,” A Comparison of Rice Husk Ash Mixture Proportions and Interlocking Brick Thickness on Compressive Strength” Southeast Asia University Engineering Journal Vol. 8 No. 1, January 2555 – May 2555
  • Thaklaew Yiamsawat and Weerapun Duangthongsuk, 2558, “Heat Transfer Performance and Pressure Drop from Flow Boiling of R134a Refrigerant Flowing Through a Small Pin Fin Heat Sink”, SAU Journal of Science and Technology, Vol. 1, No. 1, pp. 39 – 49.
  • Weerapun Duangthongsuk, Watcharaphon Intharachonabot and Thaklaew Yiamsawat, 2559, “Two-Phase Heat Transfer Performance and Pressure Drop of R-134a Refrigerant Flowing Through a Heat Sink with Small Wavy and Parallel Zigzag Flow Channels”, SAU Journal of Science and Technology, Vol. 2, No. 1, pp. 1 – 10.
  • Weerapun Duangthongsuk and Sombat Thikasap, 2560, “An Experimental Study to Determine the Pool Boiling Heat Transfer Characteristics of SiO2-Water Nanofluid on a Horizontal Cylindrical Surface”, Eastern Asia University Academic Journal, Vol. 11, No. 1, pp. 76 -86. https://he01.tci-thaijo.org/index.php/EAUHJSci/article/view/84621/68148
  • Prathun Chaiwongsa, Thaklaew Yiamsawat, and Weerapun Duangthongsuk, 2560,” A Comparison of Various Parameters Affecting Hydrogen Gas Generation Used as a Co-Fuel for Gasoline Engines” SAU Journal of Science and Technology, Vol. 3, No. 2, pp. 30 – 40.
  • Kiatpachai, P., Suksangpanomrung, A., Thiangtham, P., Keepaiboon, C., Duangthongsuk, W and Wongwises, S., 2018, “Effect of fin efficiency on air-side performance of crimped spiral fin-and-tube heat exchangers, SAU Journal of Science and Technology, Vol. 4, No. 2, pp. 36-55. https://ph01.tci-thaijo.org/index.php/saujournalst/article/view/168831/121482
  • Kiatpachai, P., Suksangpanomrung, A., Thiangtham, P., Keepaiboon, C., Duangthongsuk, W and Wongwises, S., 2019, “The effect of number of tube rows on optimal design of crimped spiral fin-and-tube heat exchangers, SAU Journal of Science and Technology, Vol. 5, No. 2, pp. 24-37. https://ph01.tci-thaijo.org/index.php/saujournalst/article/view/172416/123741
  • Khanit Arunrat, and Weerapun Duangthongsuk, 2562,” Thermal Performance and Pressure Drop of a Spirally Grooved Tube” SAU Journal of Science and Technology, Vol. 5, No. 2, pp. 10 – 23. https://ph01.tci-thaijo.org/index.php/saujournalst/article/view/219709/166237
  • Parinya Kiatpachai, Asit Bunyaprapasara, Wanachat Borisut, Anothai Suksangphanomrung and Weerapun Duangthongsuk, 2564, “Design of a Field Backpack Frame for Energy Harvesting”, SAU Journal of Science and Technology, Vol. 7, No. 2, pp. 27-42. https://ph01.tci-thaijo.org/index.php/saujournalst/article/view/244645/167351
  • Dumrongsak Kijdech and Weerapun Duangthongsuk, 2022, “Using a Convolutional Neural Network of Human Body Language for Controlling a Two-Wheeled Drive Robot, SAU Journal of Science and Technology, Vol. 8, No. 1, pp. 28-39. https://ph01.tci-thaijo.org/index.php/saujournalst/article/view/248434/168622
  • Chaiyot Thammarat, Suriyan Laoharoedecha and Weerapun Duangthongsuk, 2023 “Elevation Angle Control of Aircraft Using PID Tuning with CS and FPA”, SAU Journal of Science and Technology, Vol. 9, No. 1, pp. 57-71. https://ph01.tci-thaijo.org/index.php/saujournalst/article/view/251688/170667

Conference

  • Duangthongsuk, W and Wongwises, S., 2007, “Heat Transfer and Pressure Drop Characteristics of Nanofluid Flow in a Horizontal Double Tube Heat Exchanger” Nanofluids: Fundamentals and Applications Conference, Copper Mountain, USA
  • Chaiwongsa, P., and Duangthongsuk, W, 2008, “Comparison of the Heat Transfer Performance of CPU Cooling Using Air Cooled and Thermo-Electrics Heat Exchanger” International Workshop and Symposium on Science and Technology 2008, Rajamangala University of Technology Isan and King Mongkut’s University of Technology Ladkrabang, Thailand https://www.researchgate.net/publication/281832392_Comparison_of_the_Heat_Transfer_Performance_of_CPU_Cooling_Using_Air_Cooled_and_Thermo-Electrics_Heat_Exchanger
  • Duangthongsuk, W and Wongwises, S., 2010, “A Comparison on the Heat Transfer and Flow Characteristics of TiO2-Water Nanofluids Having Two Different Chemical Agents” Proceedings of the ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, Montreal, Canada. https://www.researchgate.net/publication/267495051_A_Comparison_on_the_Heat_Transfer_and_Flow_Characteristics_of_TiO2- Water_Nanofluids_Having_Two_Different_Chemical_Agents
  • Chaiwongsa, P., and Duangthongsuk, W 2010, “Hot Water Making Potential Using of a Conventional Air-Conditioner as an Air-water Heat Pump” International Workshop and Symposium on Science and Technology 2010, Rajamangala University of Technology Isan and King Mongkut’s University of Technology Ladkrabang, Thailand. https://www.researchgate.net/publication/241123877_Hot_Water_Making_Potential_Using_of_a_Conventional_Air-Conditioner_as_an_Air-Water_Heat_Pump
  • Duangthongsuk, W and Wongwises, S., 2011, “Heat transfer enhancement and flow characteristic of Al2O3-water nanofluids flowing through a microchannel heat sink” The second TSME International Conference on Mechanical Engineering, 19-21 October 2011, Krabi, Thailand   
  • Duangthongsuk, W and Wongwises, S., 2012, “Local Heat Transfer Coefficient and Friction Characteristics of a Common Circular Tube with Fixed Blade Type Swirl Generator Inserts” The third TSME International Conference on Mechanical Engineering, 19-21 October 2012, Cheing Rai, Thailand. https://www.researchgate.net/publication/281832628_Local_Heat_Transfer_Coefficient_and_Friction_Characteristics_of_a_Common_Circular_Tube_with_Fixed_Blade_Type_Swirl_Generator_Inserts
  • A.S. Dalkilic, N. Kayaci, A. Celen, Duangthongsuk, W and Wongwises, S., 2012, “Critical Review on the Determination of Physical Properties of Nanofluids for the Convective Heat Transfer in Tubes” The third TSME International Conference on Mechanical Engineering, 19-21 October 2012, Cheing Rai, Thailand      
  • Bajestan, E.E., Moghadam, M.C., Niazmand, H., Duangthongsuk, W and Wongwises, S., “Investigation on Convective Heat Transfer of Nanofluids: An application to Solar Collectors” 4th Annual Clean Energy Conference (ACEC2014), 25-26 June 2014, At Kerman, Iran
  • Duangthongsuk, W and Wongwises, S., 2015, “Effect of Twist Angle of Swirl Flow Device on the Thermal Performance of a Common Smooth Tube” The fifth TSME International Conference on Mechanical Engineering, 16-19 December 2015, Thailand. https://www.researchgate.net/publication/325988514_Effect_of_Twist_Angle_of_Swirl_Flow_Device_on_the_Thermal_Performance_of_a_Common_Smooth_Tube
  • Duangthongsuk, W, 2016, “Thermal and Hydraulic Performances of Nanofluids Flow in Microchannel Heat Sink with Multiple Zigzag Flow Channels”, 5th International Conference on Material Science and Engineering Technology (ICMSET 2016), October 29-31, 2016, Tokyo, Japan. https://www.matecconferences.org/articles/matecconf/abs/2017/09
  • Ge., O, Thongrawd, C and Duangthongsuk, W., 2022, “Orbitz House Pet Care On-line Store”, The 2022 International Academic Multidisciplines Research Conference in Munich, Munich, Germany. http://www.ijbts-journal.com/images/main_1366796758
  • Pei., H, Eamurai, P and Duangthongsuk, W, 2022, “Wenbo Culture Media”, The 2022 International Academic Multidisciplines Research Conference in Munich, Munich, Germany. http://www.ijbts-journal.com/images/main_1366796758
  • Weerapun Duangthongsuk, 2547,” Prediction of Two-Phase Pressure Drop Using Homogeneous Flow and Separated Flow Models Compared with Experimental Results” The 18th Conference of Mechanical Engineering Network of Thailand, Khon Kaen University
  • Napaphat Prathansong and Weerapun Duangthongsuk, 2551,” Increasing the Coefficient of Performance of a Refrigeration System Using a Liquid-to-Suction Heat Exchanger” The 1st PSU Phuket Research Conference, Prince of Songkla University, Phuket Campus
  • Weerapong Kanjanawongkul and Weerapun Duangthongsuk, 2552,” A Study and Comparison of the Effects of Residual Water Content and Operating Speed on Fiber Stripping for a Coconut Husk Beating Machine” The 10th Conference of the Thai Society of Agricultural Engineering, Suranaree University of Technology in collaboration with the Society of Agricultural Engineering ofThailand
  • Prathun Chaiwongsa and Weerapun Duangthongsuk, 2552,” Enhancing the Thermal Performance of a Small Air Conditioner Using an Air-Cooled Condenser Combined with Water Vapor Evaporation for Heat Dissipation” National Research Presentation 2009, National Research Council of Thailand (NRCT)
  • Weerapun Duangthongsuk and Napaphat Prathansong, 2552,” An Experimental Study to Determine the Heat Transfer and Flow Behavior of Straight and Twisted External Finned-Tube Heat Exchangers” The 2nd PSU Phuket Research Conference, Prince of Songkla University, Phuket Campus
  • Weerapun Duangthongsuk and Napaphat Prathansong, 2553,” Characteristics of the Local Heat Transfer Coefficient and Pressure Drop from Water Flow Inside a Horizontal Tube Fitted with a Swirl Generator at the Inlet” The 3rd PSU Phuket Research Conference, Prince of Songkla University, Phuket Campus
  • Weerapun Duangthongsuk, Weerapong Kanjanawongkul and Phongsakorn Kerdchang, 2554,” Effect of Flow Channel Characteristics of a Heat Sink on Heat Transfer Performance and Pressure Drop” The 10th Conference on Heat and Mass Transfer in Thermal Equipment and Processes, Chiang Mai University
  • Weerapong Kanjanawongkul, Weerapun Duangthongsuk and Phongsakorn Kerdchang, 2554,” A Study of Temperature Behavior in the Case of Non-Uniform Heat Conduction During Water Quenching of Metal Specimens Using the Jominy Test Method” The 10th Conference on Heat and Mass Transfer in Thermal Equipment and Processes, Chiang Mai University
  • Thaklaew Yiamsawat, Weerapun Duangthongsuk and Somchai Wongwises, 2554,” Characteristics of Pool Boiling of Alumina-Water Nanofluid on a Horizontal Cylindrical Heating Surface” The 25th Conference of Mechanical Engineering Network of Thailand, 19-21 October 2554, Krabi, Thailand
  • Weerapun Duangthongsuk, Suriyan Laoharoedecha and Somchai Wongwises, 2557,” Enhancement of Heat Transfer Performance at the Tube Inlet Using a Freely Rotating Worm-Gear Swirl Generator” The National Interdisciplinary Conference, Southeast Asia University 2557, 30 April 2557, Bangkok, Thailand
  • Thaklaew Yiamsawat, Weerapun Duangthongsuk and Somchai Wongwises, 2557, “Measurement of the Thermal Properties of Alumina Nanofluid”, The National Interdisciplinary Conference, Southeast Asia University 2557, 30 April 2557, Bangkok, Thailand
  • Napaphat Prathansong, Thaklaew Yiamsawat and Weerapun Duangthongsuk, 2557, “Effect of Surface Roughness on Pool Boiling Heat Transfer Performance of Alumina-Water Nanofluid”, The National Interdisciplinary Conference, Southeast Asia University 2557, 30 April 2557, Bangkok, Thailand
  • Thaklaew Yiamsawat, Weerapun Duangthongsuk and Somchai Wongwises, 2557,” Enhancement of Heat Transfer Performance by Using a High-Performance Ribbed Tube Heat Exchanger to Replace a Conventional Smooth Tube” The 28th Conference of Mechanical Engineering Network of Thailand, 15-17 October 2557, Khon Kaen, Thailand
  • Duangthongsuk, W and Wongwises, S., 2014, An Experimental Study on the Heat Transfer Performance and Flow Characteristics of Nanofluids Flowing Through Microchannel Heat Sink with Different Configurations, The 14th ‘Young Researchers Meet TRF Senior Research Scholars’ Conference, 23-25 October 2557 at Ambassador City Jomtien Hotel, Pattaya   Chonburi Province
  • Thaklaew Yiamsawat, Chalermchon Panraksa, Narin Phuknin, Kitti Nilphueng and Weerapun Duangthongsuk, 2558, Heat Transfer Performance and Pressure Drop of Nanofluid Flowing in a Plate Heat Exchanger, The 29th Conference of Mechanical Engineering Network of Thailand, 1-3 July 2558 Nakhon Ratchasima Province, Thailand http://cheqa.rmuti.ac.th/rmuti_1700/2558
  • Thaklaew Yiamsawat and Weerapun Duangthongsuk, 2558, “Effect of Nanofluid Concentration, Type, and Size of Heating Surface on Pool Boiling Heat Transfer Performance”, The National Interdisciplinary Conference, Southeast Asia University 2558, 25 June 2558, Bangkok, Thailand
  • Thaklaew Yiamsawat and Weerapun Duangthongsuk, 2559, “Heat Transfer and Flow Performance of R-134a Refrigerant Flowing Through a Heat Sink with Small Pin Fins”, The 30th Conference of Mechanical Engineering Network of Thailand, 6-8 July 2559 Songkhla Province, Thailand
  • Thaklaew Yiamsawat, Adirek Suriyawong and Weerapun Duangthongsuk, 2559, “Pool Boiling Heat Transfer Performance of Zinc Oxide-Water Nanofluid on a Cylindrical Heating Surface”, The National Interdisciplinary Conference, Southeast Asia University No. 3 2559, 23 June 2559, Bangkok, Thailand
  • Adirek Suriyawong, Taenta Suriyawong, Sira Saison, Weerapun Duangthongsuk, and Somchai Wongwises, 2559, “Water Heater Using a Refrigeration System”, The National Interdisciplinary Conference, Southeast Asia University No. 3 2559, 23 June 2559, Bangkok, Thailand
  • Thaklaew Yiamsawat, Kittipong Sakammatapan and Weerapun Duangthongsuk, “A Study of the Effect of Ethanol-Blended Biodiesel on the Efficiency of a Low-Speed Diesel Engine”, The National Interdisciplinary Conference, Southeast Asia University No. 4 2560, 23 June 2560, Bangkok, Thailand https://sites.google.com/sau.ac.th/saunic2017/
  • Napaphat Prathansong, Dumrongsak Kijdech and Weerapun Duangthongsuk, “Semi-Automatic Robot for Cleaning Air Conditioner Ducts”, The National Interdisciplinary Conference, Southeast Asia University No. 5 2561, 22 – 23 June 2561, Bangkok, Thailand https://sites.google.com/sau.ac.th/saunic2018/proceeding?authuser=0
  • Samit Songsomboon and Weerapun Duangthongsuk, “Development of Multimedia to Support Learning in Basic Electro-Pneumatic Control Circuit Design” The National Interdisciplinary Conference, Southeast Asia University No. 5 2561, 22 – 23 June 2561, Bangkok, Thailand https://sites.google.com/sau.ac.th/saunic2018/proceeding?authuser=0
  • Thaklaew Yiamsawat and Weerapun Duangthongsuk, “Performance of a Poncelet Wheel Electricity-Generating Turbine Operating with a Coil-Tube Water Pump Powered by Water Flow”, The National Interdisciplinary Conference, Southeast Asia University No. 5 2561, 22 – 23 June 2561, Bangkok, Thailand https://sites.google.com/sau.ac.th/saunic2018/proceeding?authuser=0
  • Thaklaew Yiamsawat, Weerapun Duangthongsuk and Parinya Kiatpachai, “An Experimental Study to Determine the Heat Transfer Performance and Pressure Drop from Nanofluid Flow Through a High-Performance Heat Exchanger Tube”, The National Interdisciplinary Conference, Southeast Asia University No. 6 2562, 21 – 22 June 2562, Bangkok, Thailand https://saunic2019.sau.ac.th/proceeding
  • Dumrongsak Kijdech, Thaklaew Yiamsawat and Weerapun Duangthongsuk, “Semi-Automatic Robot for Surveying Suspicious Objects in Confined Areas Using Image Analysis”, The National Interdisciplinary Conference, Southeast Asia University No. 6 2562, 21 – 22 June 2562, Bangkok, Thailand https://saunic2019.sau.ac.th/proceeding
  • Thaklaew Yiamsawat, Weerapun Duangthongsuk, “Effect of Free Rotation of an Externally Mounted Swirl Generator on Heat Transfer Performance and Air-Side Pressure Drop”, The National Interdisciplinary Conference, Southeast Asia University No. 7 2563, 20 June 2563, Bangkok, Thailand https://saunic2020.sau.ac.th/proceeding
  • Thaklaew Yiamsawat, Weerapun Duangthongsuk, “Pool Boiling of Deionized Water on Aluminum Heating Surfaces with Different Roughness”, The National Interdisciplinary Conference, Southeast Asia University No. 8 2564, 25 June 2564, Bangkok, Thailand https://saunic2021.sau.ac.th/proceeding
  • Thaklaew Yiamsawat, Weerapun Duangthongsuk and Khanit Arunrat, “Heat Transfer and Flow Characteristics on the Outer Tube Side of a Double-Tube Counter-Flow Heat Exchanger Fitted with External Turbulence Generators”, The National Interdisciplinary Conference, Southeast Asia University, No. 9, 2565, 24 June 2565, Bangkok, Thailand https://saunic2022.sau.ac.th/oral-session

Lecturer Thaklaew Yiamsawat

Email : thaklaewy@sau.ac.th

Qualifications

Bachelor's Degree

  • B.Eng. Mechanical Engineering Southeast Asia University

Master's Degree

  • M.Eng. Mechanical Engineering King Mongkut’s University of Technology Thonburi

Doctoral Degree

–

  • Thaklaew Yiamsawat and Weerapun Duangthongsuk. (2564). Pool Boiling of Deionized Water on Aluminum Heating Surfaces with Different Roughness. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, 2564 No. 8, Bangkok, Research Office, Southeast Asia University, pp. 807-813
  • Thaklaew Yiamsawat, Weerapun Duangthongsuk and Khanit Arunrat. (2565). Heat Transfer and Flow Characteristics on the Outer Tube Side of a Double-Tube Counter-Flow Heat Exchanger Fitted with External Turbulence Generators. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, 2565 No. 9, Bangkok, Research Office, Southeast Asia University, pp. 282-289
  • Nat Chankrob, Amphawan Srithong, Manit Thimata, Thaklaew Yiamsawat, Jirasak Sinsukudomchai, Khanit Arunrat, and Pornnipa Boriboonsuksri. (2566). Design of a System to Prevent Health Impacts from Exposure to Incense Smoke in the Thai Buddhist Custom of Lighting Incense and Candles for Worship. Proceedings of the National Conference,  Interdisciplinary Studies, Southeast Asia University No. 10, Bangkok, Research Office, Southeast Asia University,pp. 190-195
  • Wattana Kasikul and Thaklaew Yiamsawat. (2566). Energy Conservation Analysis for Thai Laminate Manufacturer Co., Ltd.. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, No. 10, Bangkok, Research Office, Southeast Asia University, pp. 235-240
  • Thaklaew Yiamsawat, Wattana Kasikul, Dumrongsak Kijdech, Prathun Chaiwongsa and Weerapun Duangthongsuk. (2567). Thermal and Flow Performance of a Heat Sink with Small Flow Channels Interspersed with Pin Fins Using Nanofluids as the Working Fluid. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, No. 11, Bangkok, Research Office, Southeast Asia University, pp. 485-494
  • Pornnipa Boriboonsuksri, Natrommanya Chantraprapakun, Natthaphat Chanphon, Jirasak Sinsukudomchai, Supinya Jindamorakot, Vatha Yongsmith, Ponlaphat Aranyakananda, Piyachai Chailoratana, Surawit Tunchaiyaphum, Suthamet Ritcham, Woralak Rakkiatngam, Somphop Limprapaipong, Phongprasert Prasertkaew, Piyawat Boonprasert, Namphueng Patthawi, Ratthaphon Wongbuakaew, Wattana Kasikul, Amonpong Sanguansin, Thaklaew Yiamsawat, Phongsathorn Ritthirong, Nat Othanasap, Boonlert Suechoey and Nat Chankrob. (2567). Design and Development of a Waste Incinerator for Religious Meditation Centers. Proceedings of the National Conference, Engineering Education No. 20, 25-27 September 2567, pp. 30-36.
  • Wattana Kasikul and Thaklaew Yiamsawat. (2568). Carbon Footprint in Industrial Work. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, No. 12, Bangkok, Research Office, Southeast Asia University, pp. 210-218

–

Dr. Dumrongsak Kijdech

Email : dumrongsakk@sau.ac.th

Qualifications

Bachelor's Degree

  • B.Eng. Mechanical Engineering Rajamangala University of Technology Phra Nakhon

Master's Degree

  • M.Eng. Mechanical Engineering Kasetsart University

Doctoral Degree

  • Ph.D. Robotics and Automation Engineering King Mongkut’s University of Technology Thonburi
  • Dumrongsak Kijdech and Suphachai Wongbunyong. (2564). Using Artificial Intelligence to Assist in Locating and Classifying Cacti for Automatic Plant Watering. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, 2564 No. 8, Bangkok, Research Office, Southeast Asia University, pp. 814-821
  • Dumrongsak Kijdech and Weerapun Duangthongsuk. (2565). Using a Convolutional Neural Network of Human Body Language for Controlling a Two-Wheeled Drive Robot. SAU Journal of Science and Technology, Vol. 8(1), pp. 28-39
  • Thaklaew Yiamsawat, Wattana Kasikul, Dumrongsak Kijdech, Prathun Chaiwongsa and Weerapun Duangthongsuk. (2567). Thermal and Flow Performance of a Heat Sink with Small Flow Channels Interspersed with Pin Fins Using Nanofluids as the Working Fluid. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, No. 11, Bangkok, Research Office, Southeast Asia University, pp. 485-494
  • Peng, Z., Ruengphrathuengsuka, W., Duangthongsuk, W. and Kijdech, D. (2025).  Economic and Environmental Analysis of Combined Rain Garden-PV Panel System: A Case Study in Dongwu New Village, Xi’an, China. Proceedings of SAU National Interdisciplinary Conference 2025, pp. 812-819
  • Wang, Y., Ruengphrathuengsuka, W., Duangthongsuk, W. and Kijdech, D. (2025). Comparative Analysis of Analog, Parameter, and Three-Point Estimation Methods for Overflow Dam Cost Management in Shaanxi, China. Proceedings of SAU National Interdisciplinary Conference 2025, pp. 820-825
  • Zhao, Y., Ruengphrathuengsuka, W., Duangthongsuk, W. and Kijdech, D. (2025). The Impact of China’s Policy from Subsidies to Market-Driven Growth: Comparative Analysis of BYD and Tesla. Proceedings of SAU National Interdisciplinary Conference 2025, pp. 826-833
  • Dumrongsak Kijdech, & Weerapun Duangthongsuk. (2025). Using the Convolutional Neural Network (YOLOv8) with a Cartesian Robot for Automatic Disease Detection and Watering (Using the convolution neural network (YOLOv8) with Cartesian robot for automatic disease detection and watering). RMUTP Research Journal Sciences and Technology, Vol.19 , No.2, 101-118.

–

Asst. Prof. Weerapong Kanjanawongkul

Email : weerapongk@sau.ac.th

Qualifications

Bachelor's Degree

  • B.S.Tech.Ed. Industrial Engineering Rajamangala University of Technology Phra Nakhon

Master's Degree

  • M.Eng. Agricultural Engineering Kasetsart University

Doctoral Degree

–

  • Weerapong Kanjanawongkul. (2564). Development of a Device for Measuring Residual NPK Content in Pineapple Fruit. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, 2564 No. 8, Bangkok, Research Office, Southeast Asia University, pp. 699-706
  • Weerapong Kanjanawongkul. (2565). Semi-Automatic Drinking Water Bottle Filling and Capping Machine. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, 2565 No. 9, Bangkok, Research Office, Southeast Asia University, pp. 245-249
  • Weerapong Kanjanawongkul. (2566). A Study and Evaluation of a Basic Mechanical Condition Testing System for a Material Drilling Machine. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, No. 10, Bangkok, Research Office, Southeast Asia University, pp. 204-210
  • Weerapong Kanjanawongkul and Weerapun Duangthongsuk. (2566). Examination of Certain Physical Properties Related to the Color of Black Coffee Using a Colorimeter (GDX-COL). Proceedings of the 24th National Conference of the Thai Society of Agricultural Engineering, Faculty of Engineering and Innovation, Rajamangala University of Technology Tawan-ok, pp. 1-9
  • Weerapong Kanjanawongkul and Wiboon Changruea. (2567). A Study of Braking Damping Load Effects on Mechanical Power Transmission Systems. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, No. 11, Bangkok, Research Office, Southeast Asia University, pp. 239-245
  • Thawatchai Kansorn, Ratiya Thuwaphanitchayanan, Anchaya Mongkolchaiphruek, Weerapong Kanjanawongkul and Supakit Saisunthorn. (2567). Development and Testing of a Device for Splitting Aromatic Coconuts. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, No. 11, Bangkok, Research Office, Southeast Asia University, pp. 503-507
  • Weerapong Kanjanawongkul. (2568). A Study of Using Vernier Calipers to Inspect the Dimensions of Plain-End Rigid PVC Pipe According to Thai Industrial Standards. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, No. 12, Bangkok, Research Office, Southeast Asia University, pp. 170-176
  • Nanakorn Meehin, Piyaphong Sriwongrat, Kiatkamjorn Intani, Weerapong Kanjanawongkul and Supakit Saisunthorn. (2568). Development and Testing of a Prototype Rubber-Band Fruit Wrapping Device. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, No. 12, Bangkok, Research Office, Southeast Asia University, pp. 341-348

–

Asst. Prof. Wattana Kasikul

Email : wattanak@sau.ac.th

Qualifications

Bachelor's Degree

  • B.S.Tech.Ed. Mechanical Engineering King Mongkut’s University of Technology North Bangkok

Master's Degree

  • M.S.Tech.Ed. Mechanical Engineering King Mongkut’s University of Technology North Bangkok

Doctoral Degree

–

  • Wattana Kasikul. (2564). Energy Conservation Analysis for Heng Lee Thai Latex Co., Ltd.. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, 2564 No. 8, Bangkok, Research Office, Southeast Asia University, pp. 822-829
  • Wattana Kasikul. (2565). Energy Conservation in the Plastics Industry Using Infrared Heat Technology. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, 2565 No. 9, Bangkok, Research Office, Southeast Asia University, pp. 224-229
  • Wattana Kasikul and Thaklaew Yiamsawat. (2566). Energy Conservation Analysis for Thai Laminate Manufacturer Co., Ltd.. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, No. 10, Bangkok, Research Office, Southeast Asia University, pp. 235-240
  • Thaklaew Yiamsawat, Wattana Kasikul, Dumrongsak Kijdech, Prathun Chaiwongsa and Weerapun Duangthongsuk. (2567). Thermal and Flow Performance of a Heat Sink with Small Flow Channels Interspersed with Pin Fins Using Nanofluids as the Working Fluid. Proceedings of the National Conference,  Interdisciplinary Studies, Southeast Asia University No. 11, Bangkok, Research Office, Southeast Asia University, pp. 485-494
  • Pornnipa Boriboonsuksri, Natrommanya Chantraprapakun, Natthaphat Chanphon, Jirasak Sinsukudomchai, Supinya Jindamorakot, Vatha Yongsmith, Ponlaphat Aranyakananda, Piyachai Chailoratana, Surawit Tunchaiyaphum, Suthamet Ritcham, Woralak Rakkiatngam, Somphop Limprapaipong, Phongprasert Prasertkaew, Piyawat Boonprasert, Namphueng Patthawi, Ratthaphon Wongbuakaew, Wattana Kasikul, Amonpong Sanguansin, Thaklaew Yiamsawat, Phongsathorn Ritthirong, Nat Othanasap, Boonlert Suechoey and Nat Chankrob. (2567). Design and Development of a Waste Incinerator for Religious Meditation Centers. Proceedings of the National Conference, Engineering Education No. 20, 25-27 September 2567, pp. 30-36.
  • Wattana Kasikul and Thaklaew Yiamsawat. (2568). Carbon Footprint in Industrial Work. Proceedings of the National Interdisciplinary Conference, Southeast Asia University, No. 12, Bangkok, Research Office, Southeast Asia University, pp. 210-218

–

Copyright © Southeast Asia University Tel. 02-807-4500 ext. 190,192 http://www.sau.ac.th